EPE Hydraulic Accumulator ( AMW 0.16 P 250 CC1 )
Item No: 207344
Sub-Group: ACCUMULATOR / DIAPHAGRAM
Capacity: 0.16 Ltr
Working Pressure: 250
MOC Shell: Carbon Steel
Fluid side Connection: 1''
Gas Side Connection: 5/8 " unf
Charge Pressure: 60
MOC Bladder: Nitrile
The accumulator is a device used specifically for the storage of liquid under pressure. As liquids, for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases. A flexible rubber separator i.e., the diaphragm is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the diaphragm through a pressure valve to a pressure P. The diaphragm expands, filling the entire volume V of the accumulator shell. When the system (circuit) pressure P is higher than the gas 1 precharge pressure P, the liquid enters the shell and the diaphragm is compressed reducing the gas volume to V. 1 Should the liquid pressure rise to P, the volume of gas 2 reduces to V with an attendant rise in pressure, thus 2 balancing the Liquid pressure. Potential energy is now stored in the accumulator to be utilized whenever needed.
Material of Construction.
Body: Carbon Steel-Painted or Low Temp Carbon Steel or Stainless Steel.
Diaphragm: Nitrile(NBR) or Epichlorohydrin(ECO) or (FKM). Others on request.
Diaphragm Plug: Plastic (Standard) or CS or SS. Connections
Gas Side : M28x1.5(M) or Dia 8 or 5/16” UNEF/Vg8. Others on request.
Fluid Side: Female Threaded or Combination Thread (M+F) or SAE Ports. Others on request.