
EPE Hydraulic Accumulator ( AS 4 P360 C G09 F-0-C-C-V )
Product Description:-
Brand: EPE
Item No: 210357
Group: Hydraulic
Sub-Group: ACCUMULATOR / Bladder
Capacity: 4 Ltr
Working Pressure: 360
MOC Shell: Carbon Steel
Fluid side Connection: 1''
Gas Side Connection: 5/8 " unf
Charge Pressure: 80
MOC Bladder: Nitrile
An accumulator is a device used specifically for the storage of liquid under pressure. As liquids, for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e., the bladder is fitted into the accumulator shell. An inert gas – nitrogen – is filled into the bladder through a pressure valve to a pressure P. The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P, the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P, the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
Potential energy is now stored in the accumulator to be utilized whenever needed.
Specification:-
Material of Construction.
Body: Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ….
others listed on the ordering code.
Connections
Gas Side: 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side: Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators: Externally painted in RAL-5010.
Others on request.